TruePower Glass Bottle Cutter Wine Liquor Beer Alcohol Jar Cutting Tool DIY

Description

Install the fixing baffle and wheel. Adjust the bottle to the length you want.
Rotate the bottle carefully through 360 to create a score line.
Place 2 rubber rings on both side of the score.
Pour slowly new boiling water over the entire score line between the 2 rubber rings for about 30-40 seconds.
Pour immediately lots of cold water over the score line after new boiling water until the bottle is automatically separated.
Smooth the edge with sandpaper.
TIPS:
Make sure that both hands rotate the bottle at the same time to get a flat line while cutting and not letting the boiling water overflow between the two rubbers band while pouring(The optimal distance between the two rubber rings is less than 1CM). Otherwise the edge of the bottle may not be so flat.
Please clean up the residual label before cutting the bottle (the glue on the label will shorten the life of the cutter)