Microchip Standalone UPDI Programmer No Computer Required!

Description

[zipedit]
Microchip UPDI Standalone Progra
This item will soon be discontinued due to component shortages. The replacement programmer is here:
https://www.ebay.ca/itm/225164961694
Microchip UPDI Standalone Programmer
This item is a UPDI Standalone Programmer for programming Microchip AVR/Attiny/Atmega series devices. This programmer will program the Attiny0 series, Attiny1 series and the Attiny2 series MCU's. It also supports the AVRDA and AVRDB devices as well as the Atmega0 series MCU's all without using a computer. Just load the hex files (64K MAX) and set up configuration with a simple terminal program. The programmer now operates as a standalone programmer
.
To find out if this programmer supports the MCU you are using, please see the device list below.
This programmer is great for mass production programming or for updating devices for customers. If you need to program multiple devices with the same code, the UPDI Standalone programmer really simplifies the operation! It Programs and Verifies Flash, Eeprom, Fuses, User  Row and Lock Bits. Each operation can be enabled or disabled in the configuration.
The UPDI Standalone AVR Programmer operates  through the one wire UPDI interface on your MCU. A three wire connection is required. (VCC, GND, UPDI). A cable is include with the programmer.
The programmer will operate at target voltage
5 volts
or target voltage
3 volts
. Please check your circuit before ordering this programmer.
View a video demonstration here.
There is a growing need for an
affordable standalone programmer
that supports the UPDI protocol. There is no need to install a HUGE program on your computer just to program your MCU. The UPDI programmer is fast and reliable.
You do need a computer to set it up initially, or whenever you want to change the hex files. The UPDI Standalone Programmer is configured to work best with TeraTerm (a simple terminal program). Once set up, The UPDI Standalone Programmer runs from the target power
3V or 5V only)
or a USB power supply and can supply power to your target
3V or 5V only)
. The data (Flash, Eeprom, User Row, Fuse and Lock bits) are stored in the programmers memory until they are changed. Standalone operation is invoked when jumper J1 is installed. It just can't be any easier.
The UPDI Standalone ISP Programmer can also be password protected for preventing unauthorized usage. If you are purchasing this item, please check your email messages on EBAY for instructions.
The Microchip UPDI Programmer Programs the following Devices:
ATtiny0 Series
ATtiny202
ATtiny204
ATtiny402
ATtiny404
ATtiny406
ATtiny804
ATtiny806
ATtiny807
ATtiny1604
ATtiny1606
ATtiny1607
ATtiny1 Series
ATtiny212
ATtiny214
ATtiny412
ATtiny414
ATtiny416
ATtiny417
ATtiny814
ATtiny816
ATtiny817
ATtiny1614
ATtiny1616
ATtiny1617
ATtiny3216
ATtiny3217
ATtiny2 Series
ATtiny424
ATtiny426
ATtiny427
ATtiny824
ATtiny826
ATtiny827
ATtiny1624
ATtiny1626
ATtiny1627
ATtiny3224
ATtiny3226
ATtiny3227
ATmega0 Series
ATmega808
ATmega809
ATmega1608
ATmega1609
ATmega3208
ATmega3209
ATmega4808
ATmega4809
AVRDx Series
AVR32DA28
AVR32DA32
AVR32DA48
AVR32DB28
AVR32DB32
AVR32DB48
AVR64DA28
AVR64DA32
AVR64DA48
AVR64DA64
AVR64DB28
AVR64DB32
AVR64DB48
AVR64DB64
Customer Satisfaction is very important to me!
I want 100% positive ratings!
ONCE PAYMENT HAS BEEN RECEIVED, ITEM SHIPS WITHIN ONE BUSINESS DAY