Cherry wood veneer 48" x 144" with paper backer 4' x 12' x 1/40" A grade quality

Description

Cherry wood veneer 48" x 144" on paper backer (4' x 12' feet x 1/40" thickness). Pictures are representative of actual stock and will vary in color and grain since this is a natural product.
Photos show other sizes and wet or finished veneer so that the color and grain can be depicted as it would be under clear finish. Each sheet is carefully inspected and packaged by our company, not drop shipped as with most online sellers. Detailed application instructions included.
Grain is 48" across and 144" long. 12' long veneer is rare and costs more per square foot than 8' and 10' lengths (also available).
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
Visit My eBay Store: JSO Wood Products
Other sizes, backers, and unbacked veneer may be available.
About pictures
:
Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
Thickness
:
(will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
:
generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
:
Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish
: