-40%
Carpathian Elm Burl wood veneer 10" x 14" raw no backing 1/42" thickness AA
$ 15.83
- Description
- Size Guide
Description
Carpathian Elm Burl wood veneer 10" x 14"with no backing raw veneer AA grade 1/42 thickness. ONE piece per price as pictured. All pieces are similar and in sequence. Knife marks shown in picture are normal and will sand off. Burl woods usually require some flattening. Some edge cracking as seen in photos. each piece carefully inspected and packaged with care.
Pulled from bundle # 56. Last photo on xray type edit to show depth of grain.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
Visit My eBay Store: JSO Wood Products
Other sizes and backed veneer may be available.
Some notes about raw veneers in burl form:
1) Holes and voids are common to this type of veneer and would need wood filler after lamination. Please review picture closely to see how much of this exists (if any).
2) Most burl woods require some flattening prior to lamination.
3) Pricing is per piece, not for the entire bundle. If you need more than one piece, we would give some type of discount based on the quantity.
4) Burls from the same bundle can be used to lay out side by side and end over end to make larger pieces. They will match up reasonably well after being trimmed to square or rectangular forms. This is what is done to make bigger backed sheets that we also have.