2Pcs 1-1/2" inch Diamond Tile Hole Saw Cutter 38mm Drill Bits For Glass Stone

Description

2Pcs 38
mm
Diamond Coated Hole Cutter Saw Drill Bits For Glass Tile Ceramic Marble
The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite
Product Specification:
Product Name: 38mm Diamond tip drill bit, 1.5" tile hole saw, 1-1/2 inch glass drill bit
Hole Diameter/Outer Diameter:  38mm (1-1/2")
Inner Diameter: 35.5mm
Shank Diameter: 10mm (3/8")
Total Length: 55mm(2-3/16")
Drilling Depth: 25mm depth
Quantity:
2 Pcs
Drilling speed:  Drill a Hole In Seconds
Use with water as a lubricant
Quick Tips
1.
Please add
water
for coolant and
drill slowly
2.
Start drill at 45 Degree to surface and align to 90 Degree as hole forms
3.
Never use drills while machine is in hammer action.
4.
Holes Require No Futher Work As Cutting Is Clean
Just a friendly reminder: Please add the water to cool the drill bit while drilling hole process
How to use a hand drill to drill holes in the glass/tile/stone?
Step 1. The bit on the glass/tile/stone 45 degree, open a half-moon notch on it
Step 2. Slowly up the bit to 60 degrees, and then gently drill
Step 3. Reached 90 degrees, continue to drill
Step 4. Drill through the glass/tile/stone finally, the technique requires a “wobble” of the drill rather that steady pressure straight on
We Can List Any Size( Hole diameter from 1mm - 230mm) & Amount Of This Product
We will send out your order within 1-2 days after payment has been received and cleared.
Please let us know if you are looking for other accessories or hardware. Should you have any queries, please contact me directly