27C322 27C160 27C800 27C400 Adapter for TL866 PLUS Minipro EPROM Programmer

Description

This Adapter working with all revision TL866 PLUS.
Programming adapter supporting 27C322 (4Mx8-bit), 27C160 (2Mx8-bit), 27C800 (1Mx8-bit) 27C400 (512kx8-bit) parts.
Converts the mask- EP- EEP- ROM pinouts of the above parts to the JEDEC pinout of 27C4096 EPROMs (as supported by TL866 USB programmer, and possibly other cheap programmers too). The TL866 programmer is supported through its MiniPro software by selecting '27C4096' device and disabling 'Check ID'. You may also like to reduce VPP Voltage to 12.50V (check your device data sheet).
Since the TL866 has only a 40-pin programming socket, the extra address pins on 27C800 27C160 are configured manually via dip switch (
the graphic shows the DIP-SWITCH setting).
Since 27C322 is a slightly different pin-out to the other devices, there is a switch which
must
be used
only
for 27C322 devices.
Each adapter is checked before shipment.
If you cannot program the memory, this is not the adapter's fault.
It could be the fault:
- damaged memory
- insufficiently cleared memory
- defective programmer
- etc.
I ship within 2-5 days after payment.
Delivery time (priority registered letter):
Europe: 5-30 business days (
usually 7-10 days)
UK: 7-45
business days
(
usually 10-20 days)
Outside Europe: 7-60 business days (
usually 10-14 days)
.
If you do not accept such delivery time - please do not buy.